Arbor Assays Creatinine Kit

Creatinine Assay Kit

abx098422-Hitachi7020R150ml3R250ml1 Hitachi 7020; R1: 50ml×3 R2: 50ml×1
EUR 622.8

Creatinine Assay Laboratories manufactures the arbor assays creatinine kit reagents distributed by Genprice. The Arbor Assays Creatinine Kit reagent is RUO (Research Use Only) to test human serum or cell culture lab samples. To purchase these products, for the MSDS, Data Sheet, protocol, storage conditions/temperature or for the concentration, please contact creatinine assay. Other Arbor products are available in stock. Specificity: Arbor Category: Assays Group: Creatinine Kit

Urinary Creatinine Assay Kit

1 Kit
EUR 164.4

Creatinine Microplate Assay Kit

100 Assays
EUR 245
Description: Detection and Quantification of Creatinine Content.

Urinary Creatinine Assay Kit

192 assays
EUR 518.4
Description: Cell Biolabs? Creatinine Assay Kit measures creatinine levels in urine. Samples are compared to a known concentration of creatinine standard within a 96-well microtiter plate format. Samples and standards are incubated for 30 minutes with a reaction reagent which changes color from yellow to bright orange upon reacting with creatinine, forming the creatinine-picrate complex. The plate is read with a standard 96-well spectrophotometric microplate reader at 490 nm. Higher OD values correlate with high creatinine concentrations. Sample creatinine concentrations are determined by comparison with the known creatinine standards.

QuantiChrom™ Creatinine Assay Kit

500
EUR 399
Description: For quantitative determination of creatinine and evaluation of drug effects on creatinine metabolism. Key Features: Sensitive and accurate. Use 30 µL samples. Detection limit 0.10 mg/dL (8 µM) creatinine in 96-well plate assay. Simple and high-throughput. The procedure involves addition of a single working reagent and incubation for 5 min. Can be automated as a high-throughput assay for thousands of samples per day. Improved reagent stability and versatility. The optimized formulation has greatly enhanced reagent and signal stability. Assays can be executed in 96-well plate or cuvet. Low interference in biological samples. No pretreatments are needed. Assays can be directly performed on raw biological samples. Method: OD510nm. Samples: Urine, serum, plasma and biological preparations. Species: All. Procedure: Assay takes 20 min. Kit size: 500 tests. Detection limit: 0.1 mg/dL (8 µM).

Creatinine Colorimetric/Fluorometric Assay Kit

each
EUR 561.6

EnzyChrom™ Creatinine Assay Kit

100
EUR 399
Description: For quantitative determination of creatinine and evaluation of drug effects on its metabolism. Key Features: Fast and sensitive. Linear detection range: 4.8 to 500 µM or 0.054-5.7 mg/dL (colorimetric assay) and 0.25 to 100 µM or 0.0028-1.14 mg/dL (fluorimetric assay) for a 60 min reaction. It is 3- and 53-fold more sensitive than the traditional Jaffe method (e.g. DICT-500), especially useful for small samples or where high sensitivity is required. Convenient. The procedure involves adding a single working reagent and reading after 60 minutes. Room temperature assay. No 37°C heater is needed. High-throughput. Homogeneous "mix-incubate-measure" type assay. Can be readily automated to process thousands of samples per day. Method: OD570nm; FL530/585nm. Samples: Urine, serum, plasma, and other biological preparations. Species: All. Procedure: 60 min. Size: 100 tests. Detection Limit: Colorimetric assay: 4.8 µM or 0.054 mg/dL; Fluorimetric assay: 0.25 µM or 0.0028 mg/dL.

Creatinine Colorimetric/Fluorometric Assay Kit

100 assays
EUR 536.4

Creatinine Kit information

Urinary Creatinine Assay Kit

UCR1 1 Kit
EUR 164.4

Urinary Creatinine Assay Kit

STA-378 192 assays
EUR 518.4
Description: Cell Biolabs? Creatinine Assay Kit measures creatinine levels in urine. Samples are compared to a known concentration of creatinine standard within a 96-well microtiter plate format. Samples and standards are incubated for 30 minutes with a reaction reagent which changes color from yellow to bright orange upon reacting with creatinine, forming the creatinine-picrate complex. The plate is read with a standard 96-well spectrophotometric microplate reader at 490 nm. Higher OD values correlate with high creatinine concentrations. Sample creatinine concentrations are determined by comparison with the known creatinine standards.

RealQuant Creatinine Assay Kit

C0500-050 500 Assays
EUR 999.6

Creatinine Microplate Assay Kit

DLSM0202 100 Assays
EUR 245
Description: Detection and Quantification of Creatinine Content.

EnzyChrom™ Creatinine Assay Kit

E2CT-100 100
EUR 399
Description: For quantitative determination of creatinine and evaluation of drug effects on its metabolism. Key Features: Fast and sensitive. Linear detection range: 4.8 to 500 µM or 0.054-5.7 mg/dL (colorimetric assay) and 0.25 to 100 µM or 0.0028-1.14 mg/dL (fluorimetric assay) for a 60 min reaction. It is 3- and 53-fold more sensitive than the traditional Jaffe method (e.g. DICT-500), especially useful for small samples or where high sensitivity is required. Convenient. The procedure involves adding a single working reagent and reading after 60 minutes. Room temperature assay. No 37°C heater is needed. High-throughput. Homogeneous "mix-incubate-measure" type assay. Can be readily automated to process thousands of samples per day. Method: OD570nm; FL530/585nm. Samples: Urine, serum, plasma, and other biological preparations. Species: All. Procedure: 60 min. Size: 100 tests. Detection Limit: Colorimetric assay: 4.8 µM or 0.054 mg/dL; Fluorimetric assay: 0.25 µM or 0.0028 mg/dL.

QuantiChrom™ Creatinine Assay Kit

DICT-500 500
EUR 399
Description: For quantitative determination of creatinine and evaluation of drug effects on creatinine metabolism. Key Features: Sensitive and accurate. Use 30 µL samples. Detection limit 0.10 mg/dL (8 µM) creatinine in 96-well plate assay. Simple and high-throughput. The procedure involves addition of a single working reagent and incubation for 5 min. Can be automated as a high-throughput assay for thousands of samples per day. Improved reagent stability and versatility. The optimized formulation has greatly enhanced reagent and signal stability. Assays can be executed in 96-well plate or cuvet. Low interference in biological samples. No pretreatments are needed. Assays can be directly performed on raw biological samples. Method: OD510nm. Samples: Urine, serum, plasma and biological preparations. Species: All. Procedure: Assay takes 20 min. Kit size: 500 tests. Detection limit: 0.1 mg/dL (8 µM).

Cr(Creatinine) Assay Kit(Colorimetric)

EKF60677-48T 48T
EUR 396.9

Cr(Creatinine) Assay Kit(Colorimetric)

EKF60677-5x96T 5x96T
EUR 2693.25

Cr(Creatinine) Assay Kit(Colorimetric)

EKF60677-96T 96T
EUR 567

Urinary Creatinine Assay Kit (5 kit size)

UCR5 5 Kits
EUR 409.2

Creatinine (CTN) Magnetic Luminex Assay Kit

LKU605409-96T 96T
EUR 1186.8

Creatinine ELISA Kit| Mouse Creatinine ELISA Kit

EF013537 96 Tests
EUR 826.8

Creatinine Assay, Catalog: MA-0121

MA-0121 100 wells
EUR 385

Creatinine Colorimetric/Fluorometric Assay Kit

K625-100 each
EUR 561.6

Creatinine Colorimetric/Fluorometric Assay Kit

K2130-100 100 assays
EUR 536.4

Human Urinary Creatinine(Urinary Creatinine) ELISA Kit

QY-E05390 96T
EUR 433.2

QuantiChrom™ Protein Creatinine Ratio Assay Kit

DPCR-100 100
EUR 599
Description: For quantitative determination of urinary protein and creatinine concentrations (protein/creatinine ratio, UPCR). Key Features: Sensitive and accurate. Use 20 µL samples. Linear detection range in 96-well plate: 1 - 20 mg/dL Protein and 1 - 150 mg/dL Creatinine. Fast and convenient. No sample pre-treatment is needed. Simple 10- minute "add-incubate-read" procedure. High-throughput adaptable. The procedure can be readily automated for processing thousands of samples per day. Method: OD600 and OD530nm. Samples: Urine samples. Species: All. Procedure: Assay takes 10 min. Kit size: 100 tests. Detection limit: 1 mg/dL Protein and 1 mg/dL Creatinine.